Inconel 617 Pipes Supplier, Stockist and Exporter
Table of Contents
Aurico Alloys LLP supplies inconel 617 pipes (N06617, Werkstoff 2.4663) from ready stock in Mumbai, to customers across India and in more than 40 export markets.
Pipe is specified by nominal bore and schedule, and is the backbone of any process line carrying corrosive or high-temperature fluid where wall thickness has to be matched to design pressure and corrosion allowance.
Inconel 617 holds creep strength at the temperatures where gas turbines and advanced ultra-supercritical boilers actually run.
Sizes and Specifications
| Grade | Inconel 617 |
|---|---|
| UNS number | N06617 |
| Werkstoff (W.Nr.) | 2.4663 |
| Specifications | ASTM B166 (rod, bar and wire), B168 (plate, sheet and strip), B546 (pipe) |
| Size range | Nominal bore 1/8" to 30" in Sch 5S through Sch XXS, seamless and welded (ERW / EFW), single random, double random and cut lengths. |
| Condition and finish | Annealed and pickled, bright annealed or polished, with plain, bevelled or threaded ends. |
| Certification | EN 10204 3.1 mill test certificate; 3.2 and third-party inspection on request |
| Price | INR 6,000 – 15,000 per kg. Indicative USD 71 – 176 per kg; quoted against grade, form, size and quantity. |
Equivalent Grades & Standards
| Property | Value |
|---|---|
| UNS number | N06617 |
| Werkstoff / EN number | 2.4663 |
| Density | 8.36 g/cm3 |
| Melting range | 1332-1380 °C |
| Specific heat (26 °C) | 419 J/kg·°C |
| Electrical resistivity (26 °C) | 1.22 µΩ·m |
| Pipe and tube specification | ASTM B546 |
Identifiers and physical constants for Inconel 617. A dash means no such designation is published for this grade.
Chemical Composition
Nickel balance with 20-24% chromium, 10-15% cobalt, 8-10% molybdenum and 0.8-1.5% aluminium. Cobalt and molybdenum provide solid-solution strengthening; aluminium supports the oxide.
| Element | Min (%) | Max (%) |
|---|---|---|
| Nickel (Ni) | 44.5 | — |
| Chromium (Cr) | 20.0 | 24.0 |
| Cobalt (Co) | 10.0 | 15.0 |
| Molybdenum (Mo) | 8.0 | 10.0 |
| Aluminium (Al) | 0.8 | 1.5 |
| Carbon (C) | 0.05 | 0.15 |
| Iron (Fe) | — | 3.0 |
| Manganese (Mn) | — | 1.0 |
| Silicon (Si) | — | 1.0 |
| Sulfur (S) | — | 0.015 |
| Titanium (Ti) | — | 0.6 |
| Copper (Cu) | — | 0.5 |
| Boron (B) | — | 0.006 |
Composition limits for Inconel 617. These are specification limits for the grade, not measured values for a lot; the mill test certificate supplied with your order states the actual analysis.
Mechanical and Physical Properties
Room-temperature tensile strength around 740 MPa, with exceptional creep-rupture strength between 800°C and 1100°C and good resistance to carburising and oxidising atmospheres.
Industry Applications
Why this grade
Inconel 617 carries 8-10% molybdenum alongside cobalt, and delivers the highest creep-rupture strength of the solid-solution nickel alloys in the 1000-1100°C range. Choose it over 601 when the component has to hold load at temperature rather than merely survive the atmosphere; choose 601 over it when oxidation resistance matters more than retained strength.
| Industry | Typical use |
|---|---|
| Power generation | Advanced ultra-supercritical boiler tubing and headers. |
| Aerospace | Combustion cans, transition liners and ducting. |
| Petrochemical | Catalytic reformer and high-temperature reactor internals. |
| Heat treatment | Furnace components under sustained load. |
| Nuclear | High-temperature gas-cooled reactor hardware. |
Testing and Certification
Every consignment ships with an EN 10204 3.1 mill test certificate stating heat number, chemical analysis and mechanical properties. Depending on the specification we can add positive material identification, ultrasonic and dye-penetrant testing, intergranular corrosion testing to ASTM G28 or A262, hydrostatic testing, and third-party inspection release from Lloyd's Register, Bureau Veritas, SGS or TUV.
Aurico Alloys LLP operates an ISO 9001:2015 quality management system, and can certify material to NACE MR0175 / ISO 15156 for sour service where the grade permits.
Frequently Asked Questions
Request a Quotation
Send your size, quantity and specification and we will come back with price and lead time, usually the same working day. Call +91 7977 88 6611 or email info@auricoalloys.com.