Duplex Steel Wire: Standards, Properties, and Industrial Performance
Combining ferritic-austenitic microstructure for superior strength and corrosion resistance.
Table of Contents:
Introduction: Refinery Heat Exchanger Failures
In a South Korean refinery's crude distillation unit, duplex stainless steel (DSS) tubes in overhead exchangers suffered chloride-induced stress corrosion cracking (Cl-SCC) at 148°C. MEA hydrochloride salts formed on surfaces, combined with chlorides and low pH, causing transgranular cracks from the outer surface—despite DSS's reputation. Proper duplex steel wire per EN 10088-3 and UNS S31803 prevents such issues in chemical processing, oil & gas, and marine sectors.
Specifications & Standards
Duplex wire conforms to EN 10088-3, covering 1.4462 (UNS S31803/S32205, 2205); A240 covers plate, sheet and strip and A790 covers pipe. DIN EN 1.4462 and NACE MR0175/ISO 15156 ensure sour service compliance for oil & gas.
Ferrite 35-65% verified metallographically, hardness ≤320 HV10 per NACE MR0103.
| Supplier & Manufacturer | Aurico Alloys LLP |
|---|---|
| Price | INR 850 – 1,500 per kg. Indicative USD 10 – 18 per kg; quoted against grade, form, size and quantity. |
Specifications by Grade – Wire
A specification is written for a product form. The standards below are the ones that cover wire; the plate, bar and tube specifications for these grades are different documents and are listed on their own pages.
| Grade | UNS | Wire specification |
|---|---|---|
| 2205 | S32205 | EN 10088-3 |
| 32750 | S32750 | EN 10088-3 |
| 32760 | S32760 | EN 10088-3 |
Equivalent Grades
| UNS | ASTM | DIN | EN | Type |
|---|---|---|---|---|
| S31803/S32205 | 2205 | 1.4462 | X2CrNiMoN22-5 | Duplex |
| S32750 | 2507 | 1.4410 | X3CrNiMoN27-5 | Super Duplex |
| S32304 | 2304 | 1.4362 | X2CrNiN23-4 | Lean Duplex |
| S32760 | Zeron 100 | 1.4501 | X2CrNiMoCuWN25-7-4 | Super Duplex |
Product Forms & Availability
Offered in round (0.5-10 mm Ø), flat, square, shaped wire; spools, coils, straightened lengths per EN 10088-3. Used for springs, welds (ER2209), cables in marine and power apps. Custom draws for OEM precision needs.
Chemical Composition
2205 (UNS S31803): Cr 21-23%, Ni 4.5-6.5%, Mo 2.5-3.5%, N 0.08-0.20%, Fe balance. 2507 (S32750): Cr 24-26%, Ni 6-8%, Mo 3-5%, N 0.24-0.32%, Cu ~0.5%—enhanced pitting resistance.
Mechanical & Physical Properties
| Property | 2205 Duplex | 2507 Super Duplex |
|---|---|---|
| Tensile Strength (MPa) | 620-860 | 800-1030 |
| Yield Strength (MPa) | 450 | 550 |
| Elongation (%) | 25 | 25 |
| Density (g/cm³) | 7.8 | 7.8 |
| PREN | ~35 | >40 |
Double austenitic strength with superior SCC resistance.
Applications by Industry
Chemical Processing
Pressure vessels, heat exchangers resist acids/chlorides better than 316L.
Oil & Gas
Piping, umbilicals handle H2S/CO2 per NACE; drives market growth.
Marine
Fasteners, rigging in high-chloride seawater environments.
Pharma
Hygienic process lines, corrosion-free under CIP cycles.
Power Generation
Desalination, flue gas systems for durability.
Duplex market projected $6B by 2030 (CAGR 5.4%), fueled by oil & gas.
Duplex Wire vs Common Alternatives
| Property | 2205 Duplex | 316L | 2507 Super Duplex |
|---|---|---|---|
| Yield Strength (MPa) | 450 | 220 | 550 |
| PREN | 35 | 24 | 42 |
| Cl-SCC Resistance | High | Moderate | Higher |
| Cost Relative | Medium | Low | High |
2205 ideal balance for most apps; 2507 for extremes. Duplex hex bar complements wire for forged components in UNS S31803.
Certifications, Testing & Compliance
NACE MR0175, MR0103 compliant with HIC/SSRT testing, ferrite scans (35-65%), hardness surveys. EN 10204 3.2 certs, PMI, UT for pharma/power exports.
Frequently Asked Questions
What are key standards for duplex steel wire?
EN 10088-3 for 1.4462 (UNS S31803, 2205) and 1.4410 (S32750, 2507) — ASTM A479 covers their bar, not wire; DIN 1.4462, EN X2CrNiMoN22-5. NACE MR0175 for sour oil & gas service.
2205 vs 2507 duplex wire differences?
2205 (UNS S31803): Yield 450 MPa, PREN ~35 for general use; 2507 (S32750): 550 MPa, PREN >40 for severe chlorides. Both per EN 10088-3.
Why choose duplex wire over austenitic?
Duplex doubles yield strength, higher PREN resists pitting/SCC in marine/oil. Market to $6B by 2030.
Does duplex come in hex bar form?
Yes, duplex hex bar in 2205/2507 grades (DIN 1.4462) for machining fasteners, pairing with wire in OEM kits per ASTM specs.
Global Export Destinations
We ship worldwide from Mumbai. See every destination we export to on our export markets page.
Trust Monel Hollow Bars for Mission-Critical Reliability
Adhering to EN 10088-3, DIN 1.4462, and NACE standards with rigorous ferrite/hardness testing, duplex steel wire empowers fabricators, OEMs, and procurement teams with proven reliability in corrosive services. It minimizes downtime and optimizes costs effectively.