Inconel 625 LCF Supplier, Stockist and Exporter
Aurico Alloys LLP supplies inconel 625 lcf (N06626) from stock in Mumbai, in sheets, coil, foil and strip.
Inconel 625 LCF is grain-size controlled specifically for parts that flex millions of times - bellows, diaphragms and expansion joints.
It is a flat-product grade. The restricted-composition, vacuum-melted route that gives 625 LCF its fatigue life is applied to sheet and strip, so the alloy is not made as plate or round bar - if you need those, standard Inconel 625 is the grade to quote.
Available Forms
Equivalent Grades & Standards
| Property | Value |
|---|---|
| UNS number | N06626 |
| Density | 8.44 g/cm3 |
| Melting range | 1280-1350 °C |
| Specific heat | 410 J/kg·K |
| Magnetic permeability (200 oersted at 75 °F) | 1.0006 |
Identifiers and physical constants for Inconel 625 LCF. A dash means no such designation is published for this grade.
Specifications
| Specifications | AMS 5879, supplied to low-cycle-fatigue grain-size control. Dual-certifiable to the N06625 standards |
|---|---|
| Product forms | Sheets, coil, foil, strip |
| Certification | EN 10204 3.1 as standard |
| Price | INR 5,000 – 9,500 per kg. Indicative USD 59 – 112 per kg; quoted against grade, form, size and quantity. |
Specifications by Product Form
Inconel 625 LCF (N06626) is supplied to a different standard in each form. Quote the one that matches the product you are ordering.
| Product form | Specification |
|---|---|
| Plate, sheet and strip | AMS 5879 |
Chemical Composition
Chemically the same Ni-Cr-Mo-Nb system as alloy 625, but produced to a controlled fine grain size with tightened carbon, nitrogen and silicon limits.
Mechanical and Physical Properties
The controlled microstructure roughly doubles low-cycle-fatigue life against standard 625 while keeping the same corrosion behaviour and annealed strength.
Industry Applications
| Industry | Typical use |
|---|---|
| Aerospace | Engine bellows, expansion joints and flexible couplings. |
| Automotive | Exhaust bellows and flexible connectors on commercial engines. |
| Power generation | Expansion joints in gas-turbine exhaust systems. |
| Chemical processing | Flexible hose and vibration-absorbing connectors. |
| Oil and gas | Dynamic seals and flexible risers. |
Frequently Asked Questions
Request a Quotation
Send your form, size and quantity for a same-day quote. Call +91 7977 88 6611 or email info@auricoalloys.com.