Inconel 625 Tube Supplier, Stockist and Exporter
Table of Contents
Aurico Alloys LLP supplies inconel 625 tube (N06625, Werkstoff 2.4856) from ready stock in Mumbai, to customers across India and in more than 40 export markets.
Tube is specified by outside diameter and wall thickness rather than nominal bore, which makes it the form of choice for heat exchangers, instrumentation and any assembly where the fit into a tubesheet or fitting is what governs.
Inconel 625 is strengthened in the annealed condition, so weldments keep their properties without post-weld heat treatment - the reason it dominates seawater and subsea work.
Sizes and Specifications
| Grade | Inconel 625 |
|---|---|
| UNS number | N06625 |
| Werkstoff (W.Nr.) | 2.4856 |
| Specifications | ASTM B443 (sheet, plate and strip), B444 (pipe and tube), B446 (rod, bar and wire) |
| Size range | Outside diameter 3.0 mm to 254 mm with wall thickness 0.5 mm to 15 mm, in seamless and welded construction, random or cut lengths up to 6 m and longer to order. |
| Condition and finish | Supplied annealed and pickled, bright annealed or polished, in straight lengths, U-bends and coiled tubing for instrumentation. |
| Certification | EN 10204 3.1 mill test certificate; 3.2 and third-party inspection on request |
| Price | INR 4,500 – 10,000 per kg. Indicative USD 53 – 118 per kg; quoted against grade, form, size and quantity. |
Equivalent Grades & Standards
| Property | Value |
|---|---|
| UNS number | N06625 |
| Werkstoff / EN number | 2.4856 |
| Density | 8.44 g/cm3 |
| Melting range | 1290-1350 °C |
| Specific heat (21 °C) | 410 J/kg·°C |
| Pipe and tube specification | ASTM B444 |
Identifiers and physical constants for Inconel 625. A dash means no such designation is published for this grade.
Chemical Composition
Nickel 58% minimum with 20-23% chromium, 8-10% molybdenum and 3.15-4.15% niobium plus tantalum. Niobium and molybdenum stiffen the matrix without any heat treatment.
| Element | Min (%) | Max (%) |
|---|---|---|
| Nickel (Ni) | 58.0 | — |
| Chromium (Cr) | 20.0 | 23.0 |
| Iron (Fe) | — | 5.0 |
| Molybdenum (Mo) | 8.0 | 10.0 |
| Niobium + Tantalum (Nb+Ta) | 3.15 | 4.15 |
| Carbon (C) | — | 0.10 |
| Manganese (Mn) | — | 0.50 |
| Silicon (Si) | — | 0.50 |
| Phosphorus (P) | — | 0.015 |
| Sulfur (S) | — | 0.015 |
| Aluminium (Al) | — | 0.40 |
| Titanium (Ti) | — | 0.40 |
| Cobalt (Co) | — | 1.0 (if determined) |
Composition limits for Inconel 625. These are specification limits for the grade, not measured values for a lot; the mill test certificate supplied with your order states the actual analysis.
Mechanical and Physical Properties
Annealed tensile strength around 830-965 MPa with yield above 415 MPa. Resists pitting, crevice corrosion and chloride stress-corrosion cracking, and is serviceable from cryogenic temperatures to 980°C.
Industry Applications
Why this grade
Inconel 625 combines about 9% molybdenum with 3.6% niobium, giving a PREN of 48 or better and effective immunity to pitting and crevice attack in seawater and chloride service. It resists sulphuric acid at all concentrations to 40°C and dilute concentrations to boiling. It is the general-purpose choice across marine and chemical duty; step up to 686 only where the environment defeats it.
| Industry | Typical use |
|---|---|
| Marine | Seawater piping, propulsion hardware, sheathing and fasteners. |
| Oil and gas | Subsea flowlines, umbilicals, sour-service completions and clad piping. |
| Aerospace | Exhaust ducting, thrust reversers, bellows and expansion joints. |
| Chemical processing | Acid service, scrubbers and reaction vessels. |
| Pollution control | Flue-gas desulphurisation liners and stack components. |
Testing and Certification
Every consignment ships with an EN 10204 3.1 mill test certificate stating heat number, chemical analysis and mechanical properties. Depending on the specification we can add positive material identification, ultrasonic and dye-penetrant testing, intergranular corrosion testing to ASTM G28 or A262, hydrostatic testing, and third-party inspection release from Lloyd's Register, Bureau Veritas, SGS or TUV.
Aurico Alloys LLP operates an ISO 9001:2015 quality management system, and can certify material to NACE MR0175 / ISO 15156 for sour service where the grade permits.
Frequently Asked Questions
Request a Quotation
Send your size, quantity and specification and we will come back with price and lead time, usually the same working day. Call +91 7977 88 6611 or email info@auricoalloys.com.