Titanium Grade 1 Coil Supplier, Stockist and Exporter
Table of Contents
Aurico Alloys LLP supplies titanium grade 1 coil (R50250, Werkstoff 3.7024) from ready stock in Mumbai, to customers across India and in more than 40 export markets.
Coil is the most economical way to buy sheet-gauge material when parts are blanked, roll-formed or slit to strip, because it removes the cut-length premium and keeps the surface consistent along the whole run.
Titanium Grade 1 is the most formable titanium grade, so it takes deep draws and tight bends that Grade 2 will crack on.
Sizes and Specifications
| Grade | Titanium Grade 1 |
|---|---|
| UNS number | R50250 |
| Werkstoff (W.Nr.) | 3.7024 |
| Specifications | ASTM B265 (sheet and plate), B338 (tube), B348 (bar), B861 (pipe) |
| Size range | Thickness 0.05 mm to 6.0 mm, width 3 mm to 1250 mm, supplied in slit coil, mill-edge coil or narrow strip. Coil weights and inside diameters are set to suit your decoiler. |
| Condition and finish | Available in annealed and pickled, bright annealed, cold rolled 2B, and No. 4 polished finishes, with edge condition slit, deburred or rolled to order. |
| Certification | EN 10204 3.1 mill test certificate; 3.2 and third-party inspection on request |
| Price | INR 1,250 – 6,000 per kg. Indicative USD 15 – 71 per kg; quoted against grade, form, size and quantity. |
Equivalent Grades & Standards
| Property | Value |
|---|---|
| UNS number | R50250 |
| Werkstoff / EN number | 3.7024 |
| Density | 4.51 g/cm3 |
| Melting range | 1650 °C |
| Modulus of elasticity | 15 × 10⁶ psi |
| Beta transus | 1635-1735 °F (ATI range for grades 1-4 7 11 12 and 16-18 (± 25 °F)) |
| Thermal conductivity | 13-10 Btu/ft·h·°F (ATI range for grades 1-4 7 11 12 and 16-18) |
| Coefficient of expansion (32-600 °F) | 5.1 µin/in·°F |
| Plate, sheet and strip specification | ASTM B265 |
Identifiers and physical constants for Titanium Grade 1. A dash means no such designation is published for this grade.
Chemical Composition
Commercially pure titanium with the lowest permitted interstitial content of the CP grades - oxygen to 0.18% and iron to 0.20% maximum.
| Element | Min (%) | Max (%) |
|---|---|---|
| Carbon (C) | — | 0.08 |
| Oxygen (O) | — | 0.18 |
| Nitrogen (N) | — | 0.03 |
| Hydrogen (H) | — | 0.015 (product analysis - ingot analysis for all other elements) |
| Iron (Fe) | — | 0.20 |
| Other elements (each) | — | 0.1 |
| Other elements (total) | — | 0.4 |
| Titanium (Ti) | — | Balance (determined by difference) |
Composition limits for Titanium Grade 1. These are specification limits for the grade, not measured values for a lot; the mill test certificate supplied with your order states the actual analysis.
Mechanical and Physical Properties
Minimum tensile strength 240 MPa with elongation of 24% or more, the softest and most formable of the CP grades.
Industry Applications
| Industry | Typical use |
|---|---|
| Chemical processing | Tank and vessel linings, heat exchangers and anodes. |
| Marine | Desalination plant and seawater heat exchangers. |
| Medical | Surgical trays and non-load-bearing implant hardware. |
| Architecture | Roofing, cladding and formed decorative panels. |
| Electroplating | Anode baskets, jigs and plating hardware. |
Testing and Certification
Every consignment ships with an EN 10204 3.1 mill test certificate stating heat number, chemical analysis and mechanical properties. Depending on the specification we can add positive material identification, ultrasonic and dye-penetrant testing, intergranular corrosion testing to ASTM G28 or A262, and third-party inspection release from Lloyd's Register, Bureau Veritas, SGS or TUV.
Aurico Alloys LLP operates an ISO 9001:2015 quality management system, and can certify material to NACE MR0175 / ISO 15156 for sour service where the grade permits.
Frequently Asked Questions
Request a Quotation
Send your size, quantity and specification and we will come back with price and lead time, usually the same working day. Call +91 7977 88 6611 or email info@auricoalloys.com.