Stellite® 6 Strip Supplier in India
Stellite® 6 strip (UNS R30006) is narrow cobalt-chromium-tungsten flat stock, slit to width for cladding, edge overlay and saw-doctoring. It brings the same abrasion, galling and cavitation resistance as the sheet - 36–45 HRC held to about 500 °C - in a form suited to lining edges and narrow wear faces. Strip is used where a continuous wear band is applied to a longer component.
Equivalent Grades & Standards
| Property | Value |
|---|---|
| UNS number | R30006 |
| Density | 8.44 g/cm3 |
| Melting range | 1250-1360 °C |
Identifiers and physical constants for Stellite 6. A dash means no such designation is published for this grade.
Chemical Composition
| Element | Min (%) | Max (%) |
|---|---|---|
| Cobalt (Co) | — | Balance |
| Chromium (Cr) | 27 | 32 |
| Tungsten (W) | 3 | 6 |
| Carbon (C) | 0.9 | 1.4 |
Composition limits for Stellite 6. These are specification limits for the grade, not measured values for a lot; the mill test certificate supplied with your order states the actual analysis.
Applications & Benefits
- Cladding and edge overlay on knives, doctor blades and wear bands.
- Narrow wear faces and liners where sheet is wider than needed.
- Saw-doctoring and edge protection in timber and paper plant.
- Slit to width from wear-grade stock, 36–45 HRC.
Supplied ex-stock from Mumbai with EN 10204 3.1 mill test certificates and export packaging. Contact us for widths, thicknesses and pricing, or see all Stellite 6 forms.