Stellite® 12 Round Bar Supplier in India
Stellite® 12 round bar (UNS R30012) is turned into cutting-edge tools and abrasion-resistant components - industrial knife and blade blanks, saw tips, pump vanes, bearing bushes and rotor blade edges. Its higher tungsten and carbon give a larger carbide fraction than Stellite 6, so it holds an edge under severe sliding wear at 45–51 HRC, with properties retained to about 700 °C.
Equivalent Grades & Standards
| Property | Value |
|---|---|
| UNS number | R30012 |
| Density | 8.53 g/cm3 |
| Melting range | 1225-1280 °C |
Identifiers and physical constants for Stellite 12. A dash means no such designation is published for this grade.
Chemical Composition
| Element | Min (%) | Max (%) |
|---|---|---|
| Cobalt (Co) | — | Balance |
| Chromium (Cr) | 27 | 32 |
| Tungsten (W) | 7.5 | 9.5 |
| Carbon (C) | 1.4 | 2.0 |
Composition limits for Stellite 12. These are specification limits for the grade, not measured values for a lot; the mill test certificate supplied with your order states the actual analysis.
Applications & Benefits
- Industrial knife, blade and saw-tip blanks turned from bar.
- Pump vanes, bearing bushes and rotor blade edges.
- Control plates and wear parts for abrasive, low-impact service.
- Higher carbide content than Stellite 6; 45–51 HRC, to about 700 °C.
Supplied ex-stock from Mumbai with EN 10204 3.1 mill test certificates and export packaging. Contact us for diameters, quantities and pricing, or see all Stellite 12 forms.