A leading pharmaceutical plant was forced to shut down a validation oven every three months because low-cost FeCrAl strips distorted and scaled at 950°C, wrecking temperature uniformity and risking batch rejection. The turnaround came with NiCr 40:20 Sheets, a nickel‑chromium resistance alloy that kept element geometry stable at up to 1050°C with far lower scaling and resistance drift, stretching maintenance intervals beyond a year and cutting unplanned downtime by over 60% across its heating lines.
Table of Contents
For procurement heads, maintenance engineers, fabricators, OEMs, and hardware or industrial supply stores serving chemical, oil & gas, marine, pharma, and power generation, NiCr 40:20 offers a sweet spot between premium NiCr 80:20 alloys and basic FeCrAl grades. Its combination of good electrical resistivity, reliable oxidation resistance, and stable mechanical properties up to 1050°C makes it ideal for medium‑temperature furnaces, domestic and industrial heaters, and process equipment where lifecycle cost and reliability matter more than extreme temperature capability.
Aurico Alloys LLP supports this demand as a trusted NiCr 40:20 Sheets supplier, stockist, and exporter in India to abroad, offering affordable, authentic material with mill traceability, cut‑to‑size capability, and export‑ready packaging for OEMs, panel builders, and furnace fabricators. Hardware and industrial supply stores gain a dependable, specification‑driven product line that covers everything from strip for heating elements to plate for shields and baffles.
High-quality NiCr 40:20 Sheets ready for industrial use.
Specification Overview
| Supplier & Manufacturer | Aurico Alloys LLP – NiCr 40:20 sheets supplier, stockist, exporter |
|---|---|
| Alloy Description | NiCr 40:20 nickel‑chromium resistance alloy (often referred to as Nichrome 40/20) |
| Typical Standards | NiCr resistance family; related NiCr grades covered under ASTM B344 (resistance wires/strips) and similar resistance alloy standards for heating elements |
| Max. Recommended Element Temperature | Up to 1050°C in air for heating elements and strips |
| Supply Forms | Sheets, strips, and plates; also compatible with wire/strip element designs |
| Typical Sheet/Strip Thickness | Approx. 0.2 mm to 4.5 mm for strip; heavier gauges available as sheet for shields/baffles |
| Delivery | Domestic and export supply with cut‑to‑size, marking, test reports, and export‑grade packing |
Equivalent Grades & Standards
| Property | Value |
|---|---|
| UNS number | — |
| Werkstoff / EN number | — |
| Density | 7.95 g/cm3 |
Identifiers and physical constants for Nichrome 40/20. A dash means no such designation is published for this grade.
Stock & Product Availability
As a focused NiCr 40:20 sheets stockist, Aurico Alloys LLP can supply cut sheets for panel heaters, strip for wound elements, and plate for heat shields with fast lead times, enabling hardware stores and OEMs to keep standard sizes on the shelf while supporting project‑specific geometries through cut‑to‑size and fabrication support.
For customers who already design around Nimonic 75 or similar alloys, NiCr 40:20 provides a more economical option for low‑stress resistance heating zones.
Chemical Composition
| Element | Min (%) | Max (%) |
|---|---|---|
| Nickel (Ni) | 37.0 | — |
| Manganese (Mn) | — | 1.0 |
| Iron (Fe) | — | Balance |
| Silicon (Si) | 1.8 | 3.0 |
| Chromium (Cr) | 18 | 22 |
| Carbon (C) | — | 0.10 |
| Aluminium (Al) | — | 0.30 |
| Copper (Cu) | — | 0.50 |
Composition limits for Nichrome 40/20. These are specification limits for the grade, not measured values for a lot; the mill test certificate supplied with your order states the actual analysis.
Mechanical & Physical Properties
| Property | Typical Value |
|---|---|
| Tensile Strength (room temp) | ≈700–850 N/mm² |
| Elongation (L0 = 100 mm) | ≈25–35 % |
| Specific Heat at 20°C | ≈460 J/kg·°C |
| Coefficient of Linear Expansion (20–1000°C) | ≈19 × 10⁻⁶ /K |
| Max. Operating Temp (heating element) | ≈1050°C in air |
| Electrical Resistivity at 20°C | ≈105 µΩ·cm |
| Temperature Coefficient of Resistance | ≈60 × 10⁻⁶ /°C (20–1000°C) |
Applications & Benefits
- Chemical & Oil & Gas: Strip and sheet for furnace heating elements, small reformer heaters, and pre‑heaters operating below 1050°C, with good resistance to oxidizing and mildly carburizing or semi‑reducing atmospheres.
- Marine & Power: Electric heater banks in auxiliary boilers, tank heaters, and incinerators where corrosion and scale resistance of NiCr outperforms low‑alloy FeCrAl alternatives.
- Pharma & Food: Validation ovens, dryers, and sterilizers needing stable element resistance for tight temperature control and reduced contamination risk from flaking scale.
- Hardware & OEM Supply: Ready‑made strips and sheets for coiled elements, cartridge heater wraps, and panel heaters, plus a practical alternative for customers searching for Nimonic 75 based hot components but not needing turbine‑level strength.
FAQ & Search Trends
Global Export Destinations
We ship worldwide from Mumbai. See every destination we export to on our export markets page.
Domestic Supply Network
We deliver across India from our Mumbai stockyard. See every city we supply on our supply locations page.
Conclusion
NiCr 40:20 sheets from Aurico Alloys LLP give chemical, oil & gas, marine, pharma, and power‑generation users a cost‑optimized nickel‑chromium resistance alloy with proven 1050°C performance, stable resistivity, and reliable oxidation behaviour that clearly outperforms low‑alloy FeCrAl and stainless options for heating elements and furnace components are your medium‑temperature heaters and furnaces specified with a NiCr 40:20 solution that truly balances reliability, budget, and lifecycle uptime?