Our Products
Aurico Alloys LLP supplies nickel, titanium and special steel in every major mill form, from Mumbai. Each form below covers the same twelve alloy families, so the choice is which shape you need first and which grade second.
Material is supplied cut to size against EN 10204 3.1 mill test certificates, held in stock or arranged with the manufacturer depending on grade and quantity.
Flat Products
| Form | What it is | Usually bought for |
|---|---|---|
| Sheets | Rolled flat stock, the thinner of the two flat gauges | Fabricated vessels, linings, ducting and formed components |
| Plates | Rolled flat stock in the heavier gauges | Pressure parts, tube sheets, structural and machined blanks |
| Coil | Continuous rolled strip, supplied on the coil | Feeding presses, roll-forming and slitting to width |
| Foil | The thinnest rolled gauge, down to a few hundredths of a millimetre | Shielding, gaskets, bellows, heat exchange and electronics work |
Bar, Wire and Hollow Sections
| Form | What it is | Usually bought for |
|---|---|---|
| Round Bars | Solid round section, hot rolled, forged or peeled | Turned parts, shafts, fasteners and forging stock |
| Hex Bars | Solid hexagonal section | Nuts, fittings and anything turned from across-flats stock |
| Hollow Bars | Bar with a bored centre, so the hole is not machined out | Bushes, sleeves and cylinders, saving both stock and cycle time |
| Wire | Drawn round section, supplied on spools or in coil | Springs, welding consumables, mesh and fasteners |
Tube, Pipe and Fittings
| Form | What it is | Usually bought for |
|---|---|---|
| Tubes | Sized on outside diameter and wall thickness | Heat exchangers, condensers and instrumentation |
| Pipes | Sized on nominal bore and schedule | Process piping and pressure systems |
| Fittings | Elbows, tees, reducers, caps, flanges and stub ends | Joining and redirecting a piping run in the same alloy |
Powder and Battery Products
Two ranges that do not follow the mill-form pattern, each with a hub of its own.
| Range | What it covers |
|---|---|
| Metal Powder | Eleven gas and plasma atomised grades for additive manufacturing, including Inconel 718 and 625, Ti-6Al-4V Grade 5 and ELI Grade 23, CP Titanium Grade 2, 316L, 17-4 PH, CoCrMo, H13, maraging steel and AlSi10Mg, with the size fractions each process needs |
| Pure Nickel Strips & Busbars | Nickel strip and busbar for lithium cell packs, in H-type, honeycomb and zigzag patterns cut for 18650, 21700, 26650, 32140 and 32650 cells |
Alloy Families
The same twelve families run through every mill form above. If you already know the alloy, start here instead.
Ask for a Quotation
Tell us the alloy, the form, the size and the quantity, and we will confirm availability, lead time and price. Contact us for stock availability, pricing and material test certificates.