Inconel Fittings Supplier, Stockist and Exporter
Table of Contents
Aurico Alloys LLP supplies Inconel Fittings from ready stock in Mumbai to customers across India and in more than 40 export markets. Fittings carry the same corrosion duty as the pipe they join but see higher stress concentration at every change of direction, so grade traceability and wall thickness at the extrados matter more here than anywhere else in a piping system.
Inconel covers nickel-chromium superalloys that retain strength and resist oxidation far above the limit of stainless steel. Fittings are supplied with heat-number traceability and can be bevelled, tacked or pre-fabricated into spools on request.
Sizes and Specifications
| Size range | Butt-weld fittings 1/2" to 48" NB in Sch 5S to Sch XXS; forged socket-weld and threaded fittings 1/8" to 4" NB in 3000#, 6000# and 9000# classes. |
|---|---|
| Types and finishes | Elbows (45° and 90°, long and short radius), tees (equal and reducing), reducers (concentric and eccentric), caps, stub ends, couplings, unions, plugs and bushings. |
| Specifications | ASME B16.9 and B16.28 for butt-weld, ASME B16.11 for forged fittings, with material to ASTM B366 for 600, 601, 617, 625, 686, 690 and 693. |
| Certification | EN 10204 3.1 mill test certificate; 3.2 and third-party inspection on request |
| Origin | Indian and imported mills, fully traceable by heat number |
Specifications by Grade – Fittings
A specification is written for a product form. The standards below are the ones that cover fittings; the plate, bar and tube specifications for these grades are different documents and are listed on their own pages.
| Grade | UNS | Fittings specification |
|---|---|---|
| 600 | N06600 | ASTM B366 |
| 601 | N06601 | ASTM B366 |
| 617 | N06617 | ASTM B366 |
| 625 | N06625 | ASTM B366 |
| 686 | N06686 | ASTM B366 |
| 690 | N06690 | ASTM B366 |
| 693 | N06693 | ASTM B366 |
Grades and International Equivalents
| Grade | UNS | Werkstoff (W.Nr.) |
|---|---|---|
| Inconel 600 | N06600 | 2.4816 |
| Inconel 601 | N06601 | 2.4851 |
| Inconel 617 | N06617 | 2.4663 |
| Inconel 625 | N06625 | 2.4856 |
| Inconel 718 | N07718 | 2.4668 |
| Inconel X-750 | N07750 | 2.4669 |
Chemical Composition
Inconel 600 carries 72% Ni with 14-17% Cr and 6-10% Fe; Inconel 625 adds 8-10% Mo and 3.15-4.15% Nb for solid-solution strengthening; Inconel 718 is age-hardened through 4.75-5.5% Nb plus titanium and aluminium.
Mechanical and Physical Properties
Room-temperature tensile strength ranges from about 550 MPa (600, annealed) to 1275 MPa (718, aged). Grade 625 resists oxidation to 1050°C, and 718 holds useful strength to roughly 700°C.
Industry Applications
How fittings is used
Fittings are factory-made wrought components to ASTM B366, dimensioned to ASME B16.9 for butt-weld and ASME B16.11 for socket-weld. They are the 45, 90 and 180 degree elbows, tees, reducers, caps and lap-joint stub ends that change direction, branch or change bore in a process line, and they are specified to match the pipe they join in both alloy and schedule so the weld and the corrosion behaviour stay continuous.
| Industry | Typical use |
|---|---|
| Aerospace | Turbine casings, combustion liners, exhaust ducting and fasteners. |
| Chemical processing | Acid-service reactors, bellows and evaporator tubing. |
| Oil and gas | Sour-service completion equipment, subsea hardware and flare tips. |
| Power generation | Steam-generator tubing, gas-turbine hardware and nuclear components. |
| Marine | Seawater systems and splash-zone hardware. |
Testing and Certification
Every consignment ships with an EN 10204 3.1 mill test certificate stating heat number, chemical analysis and mechanical properties. Depending on grade and specification we can supply positive material identification (PMI), ultrasonic and dye-penetrant testing, intergranular corrosion testing to ASTM A262 or G28, hydrostatic testing, and third-party inspection release notes from Lloyd's Register, Bureau Veritas, SGS or TUV.
Aurico Alloys LLP operates an ISO 9001:2015 quality management system. Material for sour service can be supplied certified to NACE MR0175 / ISO 15156 where the grade permits.
Frequently Asked Questions
Request a Quotation
Send your grade, size, quantity and specification and we will respond with price and lead time, usually the same working day. Call +91 7977 88 6611 or email info@auricoalloys.com.